MXBOX v3.5 revision 1.9

v3.5 revision 1.9, Public-Release

Changes:

Main
- added: Option to disable USB host warning message
(Options->General Settings, check "Do not show USB HCD Error Messages")
- added: USB Device List window
(Sys Menu->USB Device List)
Usefull to diagnostic USB Host and Hub capabilities

Nokia Tool
- added: XGold 213/XMM2130 hash reading by USB
implemented to regular nokia module and SL3 Logger
- added: XGold 213/XMM2130 IMEI,CCC,HWC and SIMLOCK backup/restore
- added: XGold 213/XMM2130 rpl recovery with HTI
(Services->IMEI & Security->IMEI rebuild, check "Dead Mode(Recovery)")
- added: XGold 101,XGold 110 hash reading with HTI
implemented to regular nokia module and SL3 Logger
- added: XGold 101,XGold 110 rpl recovery with HTI
(Services->IMEI & Security->IMEI rebuild, check "Dead Mode(Recovery)")
- added: WP7 host drivers to "data\drivers\nokia\wp\WMZuneSerUSB.inf"
used to working with Lumia(no need to install Zune)

- bugfix: FireAgent hung on loading empty packages
- improved: Dead Mode WP7 flashing routine
- added: Latest flash update version "11.50.000.1"

 Some screenshots:

Download links for MXBOX v3.5 revision 1.9:

source  : http://forum.gsmhosting.com/vbb/f550/mxbox-v3-5-revision-1-9-public-discussion-thread-1451811/

WARNING: di update mxkey 3.5 rev 1.8

Buat temen2 setia IVC GSM yang dah Update mxkey 3.5 rev 1.8 mungkin ada sebagian mengalami pesan WARNING seperti di dawah ini:

 log yang ijo kayak ini :

Using device: HTI Flasher Interface ( Win USB )
Connection status: UHCI:HUB:USB 2.00 Full-speed
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !
Interface: MXBOX/HTI (Powered by MXKEY)
OTP ID: xxxxxxxxxxxxxxxxxxxxxxxxxxxx
Boot ver: 00.07, Box SN: xxxxxxxx
FW version: 00.50
HTI Flasher Interface ( Win USB ) ready.


log yang orange kayak ini :

Using device: HTI PLUS Flasher Interface
Connection status: UHCI:HUB:USB 2.00 Full-speed
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !
Interface: MXBOX/HTI (Powered by MXKEY)
OTP ID: xxxxxxxxxxxxxxxxxxxxxxxxxxxx
Boot ver: 01.09, Box SN: xxxxxxxx
FW version: 00.50
HTI PLUS Flasher Interface ready.

Saya dah coba pindah port usbnya langsung ke motherboard (koneksikan tanpa usb hub). pesan warning masih tetep muncul.

Tak coba uninstal and instal mobileEx_setup_v3.5_rev1.8 tetep nihil.

Pesan warning diatas saya yakin kalau warning ini dari usb yang mungkin speed transfernya masih kurang buat memaksimalkan kinerja mxbox yang sekarang. jadi saya coba langkah2 yang mengharuskan untuk mxbox dikonek langsung ke motherboard atau ke pci usb.

Dan dari diskusi DI SINI akhirnya dapat solusinya.

mungkin karna sy masih mnggunakan PC jadul saya coba pasang PCI USB yang penampakannya sprt ini:

Dan setelah terpasang ...Tuuiiiiinggggg
akhirnya pesan warning sudah tidak muncul lagi .....ni log nya :

mudah2 an bermanfaat ....